I built the doorframe from 2x4 PT wood. The corners are screwed together with "L" braces and mounted to the foundation frame with nails and screws. I attached the end hoop to the two top corners of the doorframe with a 3/4" conduit two hole fastener that I bent into the shape of a "U".
Bigger Picture

Here is the view from inside looking towards the front
Bigger Picture

This picture shows the front corner where the end frame, foundation, and end hoop all come together.
Bigger Picture

Closeup view of the foundation, and end hoop mount.
Bigger Picture

Top view of the foundation, and end hoop mount.
Bigger Picture

This is how I attached a brace from the end wall to the side foundation.
Bigger Picture

All the PVC is connected without glue. May need to glue them together, but for now, I would like to try it without glue so I can re-do stuff if need be.
Bigger Picture